Cement sheet system -
floor mounted and overhead braced

The floor mounted, overhead braced, cement sheet system is hard working, robust and ideal for use in public and wet use areas subject to vandalism.

Technical Specification

Partitions:
Divisions substrate - 18mm compressed fibre cement sheet
Frontals substrate -18 mm compressed fibre cement sheet
Finish - 2 pack polyurethane paint to manufacturers recommendations
Support - Frontals continue to floor and are fixed into a purpose made channel floor track.
Head track - 40 mm x 25mm purpose made aluminium channel fixed to top of frontals, track is closed off at door head with purpose made snap in section.
Division wall track - 40mm x 25mm purpose made aluminium channel
Wall nib track - 40 mm x 25mm purpose made aluminium channel
Panel joiner - 18mm purpose made aluminium 'H' section
Aluminium track finish - Clear anodised or powder coated
Fixings -Stainless steel

Doors
Substrate -
(a) 18 mm thick moisture resistant medium density fibre board finished in 2pack polyurethane paint.
(b) 18mm thick high-density waterproof fibreboard finished in 2 pack polyurethane paint.
(c) 18mm thick high moisture resistant particle board finished in select laminate

Hinge set
Invincible Heavy duty hold-open gravity type lift-off hinges Invincible Indicator bolt with staple
Invincible Flush bumper/stop
Invincible Coat hook bumper

Finish -Satin chrome plate (powder coat available)
Fixings - Stainless steel

Kirkbuild advise
Recommended Use areas:
Wet areas of all types
High use areas - system is very robust
Areas subject to vandalism

Installation:
Installed in finished room to finished walls and floor. No preliminary site work required
DEGREE OF DIFFICULTY TO INSTALL - SIMPLE

Problems:
Panels are subject to scratching during installation. Care must be taken with handling. Panels weigh 35Kg/Sq Metre so larger panels are heavy.
Transport by flat pack system. Panels are individually wrapped in cell foam and then crated. TRAVELS WELL.

Cost:
HIGH PREMIUM / PREMIUM / MODERATE / ECONOMICAL

Technical Drawing # 2