Floor mounted - overhead braced system - laminate finish

The Floor mounted, overhead braced system is ideal for high use areas such as airports and office buildings. A premium product for use in dry areas only.

TYPE B - Post forming grade laminate coved at junction of division & frontal, all vertical front edges of doors & frontals are profiled. Horizontal edges are finished in matching laminate.

TYPE C - Post forming grade laminate coved at junction of division & frontal, all edges are finished in matching laminate.

Technical Specification

Partitions:
Divisions substrate - 18mm high moisture resistant particleboard
Frontals substrate - 33mm high moisture resistant particleboard
Finish - Select laminate coved at junction of division and frontal
Edges - Self edged
Support - 25 mm diameter polished 304 grade stainless steel cored into finished floor and topped with 35mm diameter satin chrome plated die cast support saddle
Head track - 40mm x 25 mm aluminium box section
Division wall track - 25mm x 25mm purpose made aluminium channel
Wall nib track - 40mm x 25mm purpose made aluminium channel
Aluminium track finish - Clear anodised or powder coated
Fixings - Stainless steel

Doors:
Substrate - 33mm high moisture resistant particle board
Finish - Select laminate
Edges - Self edged

Hinge set -
- Invincible Heavy duty hold-open gravity type lift-off hinges
- Invincible Indicator bolt with staple
- Invincible Flush bumper/stop
- Invincible Coat hook bumper

Finish - Satin chrome plate (powder coat available)
Fixings - Stainless steel

Kirkbuild Advise
Recommended Use areas:
Considered prestigious/premium product because of post formed laminate to junction of division and frontal
Dry areas only - no showers or hose out situations
Ideal for high use areas, such as airports and office buildings - system is very rigid because it is braced over the frontals and mounted securely to floor

Installation:
Installed in finished room to finished walls and floor. No preliminary site work required
DEGREE OF DIFFICULTY TO INSTALL - SIMPLE

Problems:
Manufactured in one piece, so can be bulky. Easily damaged during transport and handling. So great care has to be taken. Cubic tonnage higher than flat pack.
USE FURNITURE REMOVALIST FOR TRANSPORT
No tolerance built into the system, so care has to be taken with set out.

Cost:
Cost is dependent on laminate selection
HIGH PREMIUM / PREMIUM / MODERATE / ECONOMICAL

Technical Drawing #5