Floor mounted - free standing system
- laminate finish

The Floor mounted, free standing system is ideal for corporate amenities. A stylish, prestigious product for use in dry areas only.

TYPE B - Post forming grade laminate coved at junction of division and frontal, all vertical front edges of doors & frontals are profiled. Horizontal edges are finished in matching laminate.

TYPE C - Post forming grade laminate coved at junction of division and frontal, all edges are finished in matching laminate.

Technical Specification

Partitions
Divisions substrate - 18mm high moisture resistant particleboard
Frontals substrate -33mm high moisture resistant particleboard
Finish - Select laminate
Edges -Self edged
Support - A 6mm thick purpose made floor fixing bracket is cored into partition frontal and is integral with the partition. The partition is bolted to the finished floor using expanding or chemical anchors. The base of the frontal is encased in a purpose made 304 grade stainless sleeve.
Division wall track - 25mm x 25mm purpose made aluminium channel
Wall nib track - 40 mm x 25mm purpose made aluminium channel
Aluminium track finish - Clear anodised or powder coated
Fixings -Stainless steel

Doors
Substrate -33mm high moisture resistant particle board
Finish - Select laminate
Edges - Self edged

Hinge set - Invincible Heavy duty hold-open gravity
type lift-off hinges
Invincible Indicator bolt with staple
Invincible Flush bumper/stop
Invincible Coat hook bumper

Finish -Satin chrome plate (powder coat available)
Fixings - Stainless steel

Kirkbuild Advise
Recommended Use areas:
Considered prestigious/premium product because of post formed laminate to junction of division and frontal
Dry areas only - no showers or hose out situations
Ideal for corporate amenities. As there is no head rail, partitions look aesthetically pleasing. Would not recommend in public amenities because of possible mistreatment

Installation:
Installed in finished room to finished walls and floor. No preliminary site work required
DEGREE OF DIFFICULTY TO INSTALL - SIMPLE

Problems: Manufactured in one piece, so can be bulky. Easily damaged during transport and handling. So great care has to be taken. Cubic tonnage higher than flat pack.
USE FURNITURE REMOVALIST FOR TRANSPORT
Little tolerance built into the system, so care has to be taken with set out. Vandalism can cause the mounting system to pullout of the floor.

Cost: Cost is dependent on laminate selection
HIGH PREMIUM / PREMIUM / MODERATE / ECONOMICAL

Technical Drawing # 6